SQM9…_Actuators for air and gas dampers_Product_English

SQM9…

● The actuators are used primarily for the load-dependent control of the

gas flow, oil volume and combustion air volume in connection with the

electronic ratio control LMV5.

● Areas of application are oil and gas burners of medium to larger capacity,

as well as thermal process plants.

● The actuators SQM9 are suited for driving oil pressure controllers,

butterfly valves, dampers or for use on other applications that

require rotary motion.

●Standards & Certifications:

Product features

Specification parameters

Data download

Product features

● The actuators are of rugged design and have a gear train with only little backlash.
● Control and position feedback take place via a bus system (CAN). The bus cable is also used for powering the actuators.
● The actuators are driven by stepper motors and can be positioned with a resolution of 0.1°.
Specification parameters

● Operating voltage AC 2 x 12 V
● Power consumption Approx. 40 VA at rated mains voltage
● Angular adjustment Max. 0...90°
● Reproducibility of actuator positions across the usable angular range of 0...90° ±0.8°
● Safety class III (as per DIN EN 60730-1)
● Degree of protection IP66 as per EN 60529, provided adequate cable entries are used
● Environmental conditions Operation IEC 60721-3-3
Climatic conditions Class 3K3
Mechanical conditions Class 3M3
Temperature range -20...+60 °C
Humidity <95% r.h.
● Weight Approx. 7.2 kg
● Lifetime 250,000 start cycles (OFF→ON→OFF) under load with the rated torque in the entire rotation angle range. 2,000,000 control cycles under load with
75% of rated torque in rotation angle range of 10°
Data download