● The LME75/LME76 is responsible for commissioning and supervising 1-stage or 2-stage forced draft burners or forced draft burners with pneumatic/mechanical 

   ratio control modulation in continuous operation.

● Forced draft burner for liquid fuels/Forced draft burner for gaseous fuels

● BC interface for connecting an AZL2 or PC

● Lockout reset button (info button)

● 3-multi color signal lamp (LED) for operating status and fault status messages (lockout reset button (info button) and 3 additional buttons for operation 

   in conjunction with 3 x 7-segment display)

● Analog inputs for load controller DC 0...10 V, DC 0/4...20 mA, 0...135 Ω

● 3 x 7-segment display for service, fault and status information

● Control for a PWM fan motor

● Mains voltage: 230V 50/60Hz

● Lifetime: The LME75/LME76 has a designed lifetime* of 250,000 burner startup cycles which,  under normal operating conditions in heating mode, corresponds 

   to approx. 10 years of  usage

● Power consumption: < 10W

● Safety class I 

● Safety class IP00

● Software class  Class C in accordance with  DIN EN 60730-1:2012 /  DIN EN 60730-2-5:2015  2-channel structure

● Reaction time in the event of loss of  flame  Depending on parameter 217.01

● Environmental  conditions Operation Climatic conditions: Class 3K3

                                             Mechanical conditions: Class 3M2

                                             Temperature range: -40...+60°C

                                             Humidity: < 95% relative humidity

                                             Installation altitude:Installation altitude

● Weight: Approx. 490g